Fast speed Ultra-violet laser UV marking engraving machine for PCB processing flat panel display
Advantage of UV Laser Source.
1) Good quality of laser instrument : Use high quality laser instrument of which beam bundle has got better quality than those using tranditional solid state laser marking machine while its focusing spot has been less than 20um, the divergence angle is only 1/4 of the Diode pumped laser, this utility model especially suitable for precision and fine marking. As owning to its large power density it has been found to be mostily suitable for deep engraving.
2) Highly convertible : As per up to 30% of eletro-optical convension efficiency, the whole power consumption of this machine can be less than 500W, it has been greatly found to be energy consumption saving as it only consume 1/10 of power of lamp pumped solid stat laser marking machine.
3) Long working time : use laser diode as it is pump source and the average working time can be up to 100,000 hours.
4) Friendly use : the laser can work without any maintenance , adjustment nor cleansing of the laser lens
5) Fast : It is processing speed has been 3 times faser than the tranditional laser marking machine.
Application : Widely used in integrated circuits, computer accessories, mobile phone accessories, industrial bearings, watches, electronic products, communication parts and aeronautical devices, automobile articles, household appliances, hardware tooling, wire and cable, jewelry, food and tobacco packaging and so on.
Product information:
| Model |
KY-M-UV3W
|
|
Engraving Size
| 110*1100mm |
|
Size
| 107*77*110cm |
|
Laser Power
| 3w 5w |
|
Cutting Speed
| 0 - 24,000mm/min |
|
Repeat Accuracy
| ±0.1mm |
|
Power Supply
| AC 220V ±10%, 50 - 60Hz |
|
Power Consumption
| <1,000W |
|
Working Temp
. | 0 - 45°C |
|
Working Humidity
| 8 - 95% |
|
Output File Format
| BMP, HPGL, PLT, DST, DXP, and AI |
|
Driven Method
| Stepper driving |
|
Cooling Method for Laser
| Water-cooling |
|
Work Bench
| Lifting Bench |
|
Laser Control Software
| BJ JCZ EZCAD |
UV laser marking machine applicable industries:
1. Plastic parts such as air binding
2. Gold plating, silver and other surface marking
3. UV oil plastic material surface marking,eg: samsung panel, melamine
4. Mark the surface of dehalogenated elemental materials, eg: IPHONE charger, connection wire and other peripheral products
5. Daily necessities (beverage packaging, food packaging)
6. Marking of cables and cables
7. Various pipe surface marks
8. Flexible materials and carbon fiber cutting (the material thickness is only 200um)
Uv laser marking machine features:
1. Ultraviolet lasers have the advantage of limiting thermal stress that other lasers do not.This is because most uv laser systems operate at low power levels.
2. By using a process sometimes called "cold ablation", the laser beam produces a reduced thermal impact zone that minimizes the impact of flanging, carbonation, and other thermal stresses that are usually present in higher power lasers.
3. The ultraviolet laser beam can be 10-20 degrees Celsius
Sample show:
uv laser marking machine
UV laser is different than qcw or diode laser, special laser wavelength 355nm that able to marking on metal and non-metal, you can see it as a upgraded fiber laser, the biggest advantages of uv laser is the process method, 355 nm is a cold engraving, so no heat influence in marking works, that means no destroy of material gradients, also uv laser could use on food, like fruits. For more details you can send inquiry to us.
The advantage of laser are:
* High speed
* Low cost
* Precision
* Environmental
* The marks never fades
* Long working life
* 24 hours continuos work
